The anchor chain can be said to be one of the very common products in our life. The anchor chain of many products or equipment is inseparable from the application of this product. It can be seen that although the product is small, its function is very significant.

However, sometimes people think that the chain is very convenient to use, so they don’t pay much attention to the related operation of this product, which leads to frequent mistakes in implementation. What issues should be paid attention to during the production process?

Method/Step

The quality of the oil in the hydraulic system is of great significance to the working conditions of the equipment and the service life of the equipment. If the viscosity of the hydraulic oil is not normal, the quality problems such as excessive metal content and acidity will bring inconvenience to the oil pump, oil motor and valve parts.

Normal corrosion and excessive wear; unstable hydraulic oil viscosity will also lead to unstable windlass work, sometimes the system oil is emulsified due to water inflow, resulting in abnormal system pressure, and even damage to the oil pump and oil motor.

Therefore, pay attention to observing the change of oil quality in the system at ordinary times, and clean the filter (including the magnetic filter) in time. Generally, it is cleaned every six months, and the working oil is tested regularly (yearly) (the impurity content in the oil must be lower than the NAS CLASS 10 standard).

Decide whether to renew or partly renew according to the test situation to improve the system oil quality measures to keep the oil quality in good condition Ebay Discount Code NHS.

Due to the objective instability of the working conditions of the windlass, it is easy to vibrate and loosen the fixed parts. Therefore, in daily management, we need to check from time to time whether the fixing screws of the oil pump, oil motor and windlass are loose, cracked and deformed.

The windlass is placed at the bow, which is often soaked in seawater during navigation and is easily corroded. Therefore, it is very important to lubricate the lubricating parts of the windlass. For each voyage, oil should be added to each lubricating part once.

Usually, pay more attention to checking whether the grease of each lubricating part is sufficient. The leakage of the hydraulic system will directly affect the normal operation of the windlass. Therefore, it is strictly forbidden to have leakage in the system. Once the leakage is found, it should be eliminated immediately.

Related Experience

• Breaststroke [breaststroke] swimming skills teaching illustration
• How to Wipe the Bottom of a Baby Boy and Girl
• Simple and Delicious: Milk Papaya
• Why cracks, peeling and powder loss appear in the putty powder layer
• Precautions for children playing with scooters

The production process of marine anchor chain

Aohai Anchor Chain Production Factory-Marine Anchor Chain Production Process

Tools/Materials

• Chain making unit
• Vertical anchor chain tempering furnace
• Tensile testing machine
• Metal Cutting Machine Tool
• Chemical performance testing machine
• Shot blasting machine

Detail

1. cutting
2. heating
3. ring weaving
4. flash welding
5. De-stabbing and plastic surgery
6. heat treatment
7. Tensile test
8. Instant noodle shot blasting
9. NDT
10. Dip paint, ship

Precautions

1. Anchor chains with certificates should choose professional anchor chain manufacturers
2. Aohai anchor chain can be made as an anchor chain with a certificate

How to add text anchors in short book articles

1. The previous editor introduced how to set column classification in the short book, and today the editor will introduce how to add text anchors in the short book! Amazon NHS Discount.
2. First, click the "write article" button to enter the article editing interface!
3. Enter the text content you want to publish in the article writing column!
4. After the content input is complete, select the text that needs to add an anchor chain!
5. Then click the "Insert Link" button at the top of the interface, as shown in the picture!
6. Finally, enter the URL of the link you want to add in the Insert Link bar!
7. Finally, the anchor chain text after adding is shown in the figure below.

Precautions for using anchor chains

The anchor chain can be said to be one of the very common products in our life. The anchor chain of many products or equipment is inseparable from the application of this product. It can be seen that although the product is small, its function is very significant.

However, sometimes people think that the chain is very convenient to use, so they don’t pay much attention to the related operation of this product, which leads to frequent mistakes in implementation. What issues should be paid attention to during the production process?

Explanation

The quality of the oil in the hydraulic system is of great significance to the working conditions of the equipment and the service life of the equipment. If the viscosity of the hydraulic oil is not normal, the quality problems such as excessive metal content and acidity will bring inconvenience to the oil pump, oil motor and valve parts.

Normal corrosion and excessive wear; unstable hydraulic oil viscosity will also lead to unstable windlass work, sometimes the system oil is emulsified due to water inflow, resulting in abnormal system pressure, and even damage to the oil pump and oil motor. Therefore, pay attention to observing the change of oil quality in the system at ordinary times, and clean the filter (including the magnetic filter) in time.

Generally, it is cleaned every six months, and the working oil is tested regularly (yearly) (the impurity content in the oil must be lower than the NAS CLASS 10 standard). Decide whether to renew or partly renew according to the test situation to improve the system oil quality measures to keep the oil quality in good condition.

Due to the objective instability of the working conditions of the windlass, it is easy to vibrate and loosen the fixed parts. Therefore, in daily management, we need to check from time to time whether the fixing screws of the oil pump, oil motor and windlass are loose, cracked and deformed.

Due to the objective instability of the working conditions of the windlass, it is easy to vibrate and loosen the fixed parts. Therefore, in daily management, we need to check from time to time whether the fixing screws of the oil pump, oil motor and windlass are loose, cracked or deformed Amazon Discount Code NHS.

The windlass is placed at the bow, which is often soaked in seawater during navigation and is easily corroded. Therefore, it is very important to lubricate the lubricating parts of the windlass. For each voyage, oil should be added to each lubricating part once.

Usually, pay more attention to checking whether the grease of each lubricating part is sufficient. The leakage of the hydraulic system will directly affect the normal operation of the windlass. Therefore, it is strictly forbidden to have leakage in the system. Once the leakage is found, it should be eliminated immediately.