If your Samsung ice maker is not working, here are the possible solutions:

1. Replace the water inlet valve

Make sure the water pressure in the house is 20 psi. Otherwise, the inlet valve will not be able to allow water to enter the ice maker. If the pressure does not reach 20 psi, increase the pressure and see if you can get the ice maker to work again.

But if the pressure is correct, please check whether the valve has enough power supply. If there is sufficient power to the valve and yet no water is being supplied to the ice maker, replace the inlet valve - appliancerepairshymon.ca.

2. Adjust the temperature

The temperature in the freezer should be 0 degrees Fahrenheit. At most, it should be 10 degrees Fahrenheit. If the temperature is higher than this, the ice maker will not be able to work to make ice.

Therefore, adjust the temperature if it is not at the right point. If you are at the right point, check the location. There may be a heat source directly affecting the unit and compromising its cooling capacity. Relocate the unit to a location with a more comfortable temperature and see if the freezer temperature improves.

3. Replace the water filter

Check the water filter to see if it needs changing. The indicator should alert you if the filter needs to be changed, but if not, replace it and see if it is the cause of the problem.

If the water filter is clogged with debris or needs to be replaced, it affects the ice maker's ability to operate. And if it is not installed properly or there is damage to the filter head, the ice maker will not work because there will be no free flow of water.

4. Adjust water pressure

If the water pressure is too low, less than 20 psi, adjust it to at least 20 psi. This will allow the water inlet valve to allow water into the ice maker so it can operate.

In case you cannot adjust the pressure yourself, ask a plumber to come to the house to make the adjustment.

5. Check the water line

Check that the water pipe behind the unit is tight. If it is, check to see if there is ice stuck in it, preventing water from flowing freely. Melt ice by manually defrosting the unit.

However, this also means moving each food item to another location and can be a long process. So, another way to do it is to bring a hair dryer close to it to free the line.

You can also use a cloth soaked in hot water and wrung out to massage the line. This will allow the ice maker to function properly.

6. Check the ice maker

Check that the ice maker is on. If it is, there is a possibility that the ice maker assembly is damaged. To make sure the ice maker is damaged, call a refrigerator technician to check and determine. If damaged, replace it.

Otherwise, check each part of the ice maker, as any of them could be defective, causing the ice maker to not work. But if all the parts work well, consider replacing the assembly.

Note: Ice makers often have problems if they are in the refrigerator section instead of the freezer section. This is probably because they take longer to freeze.

How to Fix Samsung Ice Maker So It Doesn't Freeze

The following are possible solutions for a Samsung ice maker that freezes:

1. Adjust the water line

Check the water line to see if it is pushed on the water inlet valve too far. If so, adjust it so it seats properly. If not properly adjusted, it could cause water to splash and freeze around the ice maker, causing it to freeze.

2. Replace the water filter

Change the unit's water filter if it has been left up to 6 months. Dirt tends to clog a water filter and if it remains for too long, it can affect water flow and even affect water pressure.

If you have recently changed the filter, check if the head is damaged or incorrectly installed. Replace it if the head is damaged and adjust it correctly if it is incorrectly positioned.

3. Adjust the freezer temperature

Adjust the freezer temperature if it is lower than it should be. The correct setting is 0 degrees Fahrenheit, so if the setting is lower than that, the ice maker will freeze too quickly. And if there is water around the ice maker, it will cause freezing problems.

4. Adjust water pressure

Check the water pressure to make sure it is no more than 120 psi and no less than 20 psi. If the pressure is greater than 120 psi, the ice maker may freeze. And if it is less than 20 psi, the water in the ice maker may not freeze.

Adjust the pressure or call a plumber or refrigerator technician to correct the pressure.

5. Check the water supply line

If the water line is frozen, defrost it with a hair dryer. Be sure to move the hair dryer up and down the rubber line so that the heat from the dryer doesn't concentrate on one spot and melt it.

If you prefer not to use the dryer method, defrost the unit manually to deal with the frozen line. It is a long but safer process.

6. Check the water inlet valve

Check the water inlet valve solenoid with a multimeter to see if it is working properly. If the solenoid is defective or if there is a leak, replace the valve. Otherwise, the valve may cause the ice cube area to fill, overflow, and freeze over time.

7. Ice machine test

When everything else is working properly, consider the ice maker. It could be defective. And if it is faulty, it could cause freezing problems. You may need to replace the entire ice maker assembly.

Parts to repair a Samsung ice maker

There are different parts to fix a Samsung ice maker, depending on the problem. But below are the most common parts that need to be replaced to fix a Samsung ice maker:

1. Ice tray assembly
2. Assembly of the ice route cover
3. Ice maker sensor cover
4. Ice maker assembly
5. Ice maker sensor
6. Ice level arm
7. Ice cube tray
8. Ice making module
9. ice spoon
10. Ice maker lid
11. ice solenoid
12. Drive motor
13. Ice bucket auger

Recapitulation

Knowing how to fix a Samsung ice maker is necessary. This is to save you time and some money. However, if you find that it is proving difficult to fix, contact Samsung support center for service.

Or, chat with our qualified technicians to help you check the problem and solve it permanently.

Remember to unplug the refrigerator before troubleshooting or fixing the ice maker to avoid electrical shock or damage to the unit.